Is Netgear Extender Not Getting Installed? How to Fix Issue?

Did you recently purchase a Netgear wireless range extender and gave its configuration a try but luck failed to have your back? Given this, we are assuming that you committed a mistake, which is, you ended up following the wrong precautions. To handle this with care, it is recommended that you go through the solutions presented in this article and get a clear picture of how to fix the issue and then, install your device via

What Prior to Troubleshooting?

Would you like to skip reading the article and find a solution that might give instant results? Well, that solution requires you to restart your Netgear wireless range extender. For this, you have to find the button by the name of power, hit it, start counting from one and finish it till ten, press it again so that you can switch on the device, but before that, ensure that it is properly plugged into the electrical socket in your house.

We are hoping that this troubleshooting solution will help you to resolve the issue at hand, in case it does not, then sadly, you are left with only one option, which is to read the ones mentioned further. You will find them as you will read this article.

How to Fix Netgear Extender Installation Issues?

  1. Provide an Adequate Power

Start the troubleshooting process by supplying a proper power supply to your Netgear wireless range extender. This can be assured if you use a damage-free wall socket. Apart from this, see to it that the wall socket is located in the same room where the host router is kept. The reason being, this will help in signal transmission to happen seamlessly and assist you to successfully finish the Netgear WiFi extender setup process.

  1. Use a Wire to Connect Devices

Another solution that you can implement to resolve the Netgear extender installation issues is to use a cable or wire instead of using a wireless source of connection. We are suggesting you this because with a wireless medium, the connection can drop at any hour of the day. Taking this into consideration, do not waste any more time in joining your devices with a cable. To be specific, use an Ethernet cable to make a connection.

  1. Input the Right Login Address

In case the first and the second troubleshooting solution failed to help you to resolve the Netgear extender setup issues, then you ought to check the login address that you have inserted. Chances are that it is not right. To take care of the problem, you should consider entering the right web address. Though this will help you out, by any chance, if it refuses to, then it is recommended that you input the IP address of the wireless range extender.

  1. Use the Address or URL Field

One of the most common factors why users find themselves unable to configure the Netgear extender with ease is the usage of the wrong field when it comes to entering the web address. Perhaps, you mistakenly used the search bar. To correct this, you ought to use the address bar also named as the URL field, to enter the web or IP address. Also, do cross-check the entrée which you have made before hitting Enter on the keyboard.

  1. Put the WPS Method to Use

In case none of the above-mentioned troubleshooting solutions help you to set up your Netgear WiFi extender in a hassle-free manner, then you are left with no other option than to learn how to reset Netgear extender. On the off chance, this seems like a risky thing to do, it is suggested that you use another method to set up your WiFi range device. Want an easier option? Use the WPS or WiFi-Protected Setup method for setup.


This ends the troubleshooting guide written on how to resolve the Netgear extender setup issues. We are expecting that now that you have walked through the solutions mentioned above, you will face no technical issues in configuring your networking device. By any chance, luck still has not kissed your feet, instead of using the WPS method; you also have the choice of putting the Nighthawk application or Netgear app to use.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button